Quick Release Propeller Guards For DJI Phantom 1, 2 & 3

  • Quick Release Feature – helps attach and detach the prop guards smoothly in just a few seconds.
  • Protection and Safety – Not only protect the props from propeller damage, but also provide safety if there are people around.
  • Lightweight – The prop guards are lightweight and unobtrusive, and will not interfere with the quadcopter’s flying.
  • Multiple Compatibility – The Drone Pit Stop propeller guards are compatible with the DJI Phantom 3, 2&1 and made to fit the quadcopter perfectly.
Other Buying Options





Download instruction manual

Maximum Protection

No drone pilot is immune to propeller-related accidents and the aftermath could be anything from the end of your quad's life to physical injuries.
If the accident takes place in a crowded place, the upshots could spread out to innocent bystanders and that’s a situation you don’t wish to find yourself in.

​These are but a few reasons why you need these prop guards from Drone Pit Stop to protect your quad, that innocent bystander, and of course yourself.
​These guards would most certainly stand up to some punishment and save your bird some expensive repairs in a light crash or rough landing situation.

Quick Release Technology

What’s so special about this technology is that it makes the loading and unloading of the guards a piece of cake.
You can keep your extra force or pressure because you won't need it anyway.
Before that, it will only take you about 5- 10 minutes to install the prop guard adapters and this you do only once.

​Once installed, it takes less than a minute to snap the guards on or off your bird.
The technology assures easy and fast transportation, so never mind that your quad can’t fit in any case with the guards installed. Just detach them and you’ll be set to go​

Durable But Flexible 

​These are made out of plastic but not the typical plastic that cracks at the slightest encounter with moderate punishment.
Take these prop guards, test them by bending them yourself, and among the things you shouldn’t expect is seeing them crack.
However, repeating the same by running them into a tree at full speed might fracture them, but the good news is your quad and props are not going to suffer the same fate as your guards might.
You will be glad you put them on for that particular flight when you'll watch your bird fly like a champ even after surviving a horrible crash or a small tree branch accidental encounter.


Here’s one important question we can’t simply pass up: what changes in flying performance should one expect with these prop guards installed?
The correct answer is very minimal. Thanks to their relatively little weight (roughly 290 grams), the effect isn’t significant enough to affect your bird’s smooth performance.
These prop guards are purely unobtrusive meaning the controls are just going to be as responsive as they were without the prop guards installed.

Easy Installation

​No, you don’t need special skills or plenty of hours to install these props to your quad.
​In fact, it’s as simple as just installing a small piece on your quad (removing the screws and putting the fittings on and this you do only once)  and the prop guards will slide on and off with ease.


Admittedly, these prop guards take the lead not just in functionality alone but design-wise too.
In designing them, every aspect was created to seamlessly fit with your quad.

If you own the DJI Phantom 1, 2 or 3, don’t ever fly either without these guards and it’s not just because they can fit them and stand up to some punishment but they will save you some expensive repairs and parts.


What is the string used for?
The string basically gives another optional protection to the propellers. Thread the string through the holes of the prop guards (under), tie it off, then stretch string onto little tabs under prop guards.
This offers protection from thin small objects that can fit between the prop guards.
Will this fit on a Phantom 3 4k, Phantom 3 advance or other versions of Phantom 3?
YES, they work great on all Phantom 3 models.
The picture shows 2 white and 2 red blades. How do I order 2 different colors?
You can find a two color option using the following link: http://drone-pitstop.com/productoverview/quick-release-propeller-guards-dji-phantom-3-carbon-fiber-gimbal-guard-black-white
Will the prop guards interfere the image or video? Will they show in the image?
No, these prop guards were designed for maximum protection with minimum interference
I'm confused... are these easy snap on and off or screws?
The base, or what I would call a "shoe", screws to the bottom of the drone body under each propeller motor. Unscrew the existing screws, mount the shoe/base, re-screw back in with provided screws (use provided screws in the kit as they are a little bit longer), this process is done once, after it’s done you simply slide the guards onto the shoe/base - on and off without using any tools and screws.

Product Type: